The ‘Medco Medium Duct’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.
Medco Medium Duct / Cobra Rods
read more
Shop
Maxco Large Duct / Cobra Rods
The ‘Maxco Large Duct’ rodding system gives a compact and labour saving solution whether installing cables in ducts, threading draw ropes through pipes or surveying drains with CCTV cameras.
High Capacity Duct / Cobra Rods
To meet the demands of this trend Prolite Lamps have developed a 14mm rodding system that can be supplied with rod up to 400 metres in length and an 11mm rodding system that can also be supplied with rod up to 550m.
Gamma Multi-bank Battery Charger 12v or 24v
The Gamma Multi-bank Battery Charger, like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only. The low voltage starts and 3 charging stages, including proportional timing, makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load. The 4 way Gamma multi-bank charger allows charging of 4 batteries at one time.
The Gamma charger range is suitable for charging SLA/Gel/Wet/AGM batteries, making them ideal for cyclic and industrial type applications. Input voltages of 110v or 230v, with output voltage options of 12v or 24v. With the output current of 4 amp to 10 amps. Enabling the Gamma charger to charge a battery range of 16AH-80AH.
Other Features
- Reverse polarity protection
- Proportional timing
- Overrun time for safety
- Short circuit protection
- CC, CV and float stage charging
The Gamma charger comes fitted with crocodile clips as standard on the output lead. However if you require a different connector please let us know and this can be arranged. If you aren’t sure which charger you require, please do not hesitate to contact us for technical assistance. Alternatively, please take a photo of your battery or current charger and email sales@prolite-lamps.co.uk and we will be able to advise the suitable charger for your application.
The Gamma battery charger is manufactured in the UK
Please note that all battery chargers are built to order, and the lead time is 3-4 days production plus shipping time.
Elite Multi-bank Battery Charger 12V, 24V & 36V
The Elite range of battery chargers, like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only. The low voltage starts and 3 charging stages, including proportional timing, makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load. The 5 Way Elite multi-bank charger allows charging of 4 batteries at one time.
The Elite charger range is suitable for charging SLA/Gel/Wet/AGM batteries, making them ideal for cyclic and industrial type applications. Input voltages of 110V or 230V, with output voltage options of 12V, 24V and 36V. With the output current of 2 Amp to 6 Amp. Enabling the Elite charger to charge a battery range of 2AH-64AH
Main Features
- Charger type – 8 stage fully automatic charging cycle
- 3 easy to read LED status indicators
- Input voltages of 110V, 230V or dual voltage
- Output voltages of 12V, 24V & 36V
- Output currents up to 8 Amps
- Proportional timing
- Independent overrun timer
- Reverse polarity protection
- Short circuit protection
- Soft start current control
- Crocodile clips fitted as standard
- IP20
Optional Features
- Output connector options available
- Ability to set for battery types including vented lead acid, sealed lead acid & gel or lead calcium
- Temperature compensation
- Dual voltage with manual switch
- Different coloured cases are available
- Multi-bank options available to charge more than one battery at once
Available in singles or multi-bank design for all applications.The Elite charger output lead comes fitted with crocodile clips as standard. However if you require another connector, please let us know and this can be arranged. If you aren’t sure which charger you require, please do not hesitate to contact us for technical assistance. Alternatively, please take a photo of your battery or current charger and email sales@prolite-lamps.co.uk and we will be able to advise the suitable charger for your application.
The Elite battery charger is manufactured in the UK
Please note that all battery chargers are built to order, and the lead time is 3-4 days production plus shipping time
Beta Twin Battery Chargers
The Beta 2 way range of chargers has been designed for customers that need to charge more than one battery at a time. Like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only. The low voltage starts and 3 charging stages, including proportional timing, makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load.
Omega Major Battery Charger 12v, 24v 36v & 48v
The Omega Major range of battery changers like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only. The low voltage start, 3 charging stages including proportional timing. Makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load.
The Omega Major Battery Charger range are bench top or wall mounted battery chargers. Ideal for charging many types of batteries SLA/Gel/Wet/AGM. With an input voltage available in either 110V or 230v AC. With output voltage options of 12v, 24v, 36v and 48v. The output current of 25 amp to 60 amp. Enabling the Omega Major charger to charge a range of batteries from 80AH to 480AH
The Omega Major charger is useful for standby applications such as in fire and security applications. The front panel has 7 LED’s as standard which incorporates a charging ladder which showing how much current the battery is drawing.The Omega major charger is built in a robust steel case which as standard is yellow, with a 2mm thick powder coat gives the charger good protection in tough industrial areas. The Omega Major charger range has the option of having switchable voltage settings, meaning it can work on either 110v or 240v. If you require this option please send your enquiry to the email address below.
This charger has no output connector fitted as standard due to the large output current available. However if you require a different connector please let us know and this can be arranged. If you aren’t sure which charger you require, please do not hesitate to contact us for technical assistance. Alternatively, please take a photo of your battery or current charger and email sales@prolite-lamps.co.uk and we will be able to advise the suitable charger for your application.
The Omega battery charger is manufactured in the UK
Please note that all battery chargers are built to order, and the lead time is 5-7 days production plus shipping time, Omega Major chargers are delivered on a pallet.
Omega Battery Charger 12V, 24V, 36V & 48V
The Omega range of battery changers like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only. The low voltage start, 3 charging stages including proportional timing. Makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load.
The Omega Battery Charger range are bench top or wall mounted battery chargers. Ideal for charging many types of batteries SLA/Gel/Wet/AGM. With an input voltage available in either 110V or 230v AC. With output voltage options of 12v, 24v, 36v and 48v. The output current of 15 amp to 30 amp. Enabling the Omega charger to charge a range of batteries from 60AH to 240AH.
The Omega charger is useful for standby applications such as in fire and security applications. The front panel has 7 LED’s as standard which incorporates a charging ladder which showing how much current the battery is drawing.The Omega charger is built in a robust steel case which as standard is yellow, with a 2mm thick powder coat gives the charger good protection in tough industrial areas.
This charger has no output connector fitted as standard due to the large output current available. However if you require a different connector please let us know and this can be arranged. If you aren’t sure which charger you require, please do not hesitate to contact us for technical assistance. Alternatively, please take a photo of your battery or current charger and email sales@prolite-lamps.co.uk and we will be able to advise the suitable charger for your application.
The Omega battery charger is manufactured in the UK
Please note that all battery chargers are built to order, and the lead time is 5-7 days production plus shipping time.
Elite Battery Charger 12V, 24V & 36V
The Elite range of battery chargers, like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only. The low voltage starts and 3 charging stages, including proportional timing, makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load.
The Elite charger range is suitable for charging SLA/Gel/Wet/AGM batteries, making them ideal for cyclic and industrial type applications. Input voltages of 110v or 230v, with output voltage options of 12v and 24v. With the output current of 2 amp to 8 amps. Enabling the Elite charger to charge a battery range of 2AH-64AH
Other Features
- 3 LED status indication
- Reverse polarity protection
- Short circuit protection
- Independent overrun timer
- Soft start current control
Available in singles or multi-bank design for all applications.The Elite charger output lead comes fitted with crocodile clips as standard. However if you require another connector, please let us know and this can be arranged. If you aren’t sure which charger you require, please do not hesitate to contact us for technical assistance. Alternatively, please take a photo of your battery or current charger and email sales@prolite-lamps.co.uk and we will be able to advise the suitable charger for your application.
The Elite battery charger is manufactured in the UK
Please note that all battery chargers are built to order, and the lead time is 3-4 days production plus shipping time
Gamma Battery Charger 12v, 24v & 48v
The Gamma range of battery chargers, like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only. The low voltage starts and 3 charging stages, including proportional timing, makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load.
The Gamma charger range is suitable for charging SLA/Gel/Wet/AGM batteries, making them ideal for cyclic and industrial type applications. Input voltages of 110v or 230v, with output voltage options of 12v, 24v and 48v. With the output current of 4 amp to 10 amps. Enabling the Gamma charger to charge a battery range of 16AH-80AH.
Other Features
- Reverse polarity protection
- Proportional timing
- Overrun time for safety
- Short circuit protection
- CC, CV and float stage charging
The Gamma charger comes fitted with crocodile clips as standard on the output lead. However if you require a different connector please let us know and this can be arranged. If you aren’t sure which charger you require, please do not hesitate to contact us for technical assistance. Alternatively, please take a photo of your battery or current charger and email sales@prolite-lamps.co.uk and we will be able to advise the suitable charger for your application.
The Gamma battery charger is manufactured in the UK
Please note that all battery chargers are built to order, and the lead time is 3-4 days production plus shipping time.