Elite Battery Charger 12V, 24V & 36V


Product Code: See Description Category: Tags: , ,

Additional information

Input Voltage AC

110V, 230V

Output Voltage

12V, 24V, 36V

Output Amps

2 Amp, 6 Amp


The Elite range of battery chargers, like all of the industrial chargers have a rugged steel powered coated case. These are micro processed 3 stage chargers, allowing the charger to be left permanently connected without harming the battery. These units can also be set for float/standby charging only.  The low voltage starts and 3 charging stages, including proportional timing, makes these units great at recovering batteries which have been misused or neglected during use. The chargers can be left connected to the battery even when the mains is turned off without fear of flattening the battery as there is no parasitic load.

The Elite charger range is suitable for charging SLA/Gel/Wet/AGM batteries, making them ideal for cyclic and industrial type applications. Input voltages of 110V or 230V, with output voltage options of 12V, 24V and 36V. With the output current of 2 Amp to 6 Amps. Enabling the Elite charger to charge a battery range of 2AH-64AH

Main Features

  • Charger type - 8 stage fully automatic charging cycle
  • 3 easy to read LED status indicators
  • Input voltages of 110V, 230V or dual voltage
  • Output voltages of 12V, 24V & 36V
  • Output currents up to 8 Amps
  • Proportional timing
  • Independent overrun timer
  • Reverse polarity protection
  • Short circuit protection
  • Soft start current control
  • Crocodile clips fitted as standard
  • IP20

Optional Features

  • Output connector options available
  • Ability to set for battery types including vented lead acid, sealed lead acid & gel or lead calcium
  • Temperature compensation
  • Dual voltage with manual switch
  • Different coloured cases are available
  • Multi-bank options available to charge more than one battery at once

Available in singles or multi-bank design for all applications.The Elite charger output lead comes fitted with crocodile clips as standard. However if you require another connector, please let us know and this can be arranged. If you aren't sure which charger you require, please do not hesitate to contact us for technical assistance. Alternatively, please take a photo of your battery or current charger and email [email protected] and we will be able to advise the suitable charger for your application.

The Elite battery charger is manufactured in the UK

Please note that all battery chargers are built to order, and the lead time is 3-4 days production plus shipping time


Model Input
(LxWxH mm)
Battery Range
Elite 1206 110v or 230v AC 12volt 6Amp 95 x 170 x 140 3.5 24 – 44A/h PDF
Elite 1208 110v or 230v AC 12volt 8Amp 95 x 170 x 140 3.5 32 – 64A/h PDF
Elite 2406 110v or 230v AC 24volt 6Amp 95 x 170 x 140 3.5 20 – 40A/h PDF
Elite 3602 110v or 230v AC 36volt 2Amp 95 x 170 x 140 3.5 8 – 16A/h